The first thing you need to know is that the stylus is a very important part of your turntable, and it’s one of the most expensive parts. The stylus is what touches the record, so if it breaks or wears out, you’re going to have problems with skipping records and other issues. So how do you keep your stylus in good shape?

Turntable Stylus Tips:

1) Cleaning the Stylus:

You can clean the stylus by using a soft brush (like a toothbrush), cleaning solution, or just plain water. Avoid applying too much pressure to the stylus to prevent scratching. If you are using a brush, make sure you get all the dirt off of it before putting it back into its case.

2) Using a Stylus Case:

A stylus case is an easy way to protect your stylus from scratches and damage. It also helps prevent dust particles from getting inside the stylus. There are many different types of cases available for different purposes. Some of them are designed specifically for vinyl records, while others are made for CD players.

3) Washing Your Stylus:

If you notice any dirt or grime around the stylus, you should wash it off. This will help remove any debris that may be stuck to it. Use warm water and soap. After washing, make sure you rinse it thoroughly.

4) Storage:

You should store your stylus where it will not get damaged or dirty. Make sure that it is out of the way of heat sources such as radiators and vents.

5) Protecting Your Stylus:

To protect your stylus, you can put it in a protective sleeve. These sleeves are usually made of plastic and come in various sizes. They are great for keeping your stylus protected when not in use.

6) Care Tips:

Try to avoid storing your stylus in direct sunlight. Heat can cause the rubber tip to expand, which could lead to cracking. Try to keep your stylus away from extreme temperatures as well.

7) How to Take Care of Turntable Stylus:

There are several ways to take care of your turntable stylus, but they all boil down to the same basic idea. First, you’ll need to find out if your stylus has been damaged. Then, you’ll need to clean it properly. Finally, you’ll need to store it safely.

How to Check If Your Stylus Is Damaged:

There are two main methods for checking whether your stylus is damaged. One method involves looking at the stylus itself. The other method involves listening to the sound coming from the stylus.

Method 1: Look At Your Stylus

In the first place, check your stylus. If there are no visible damages, you shouldn’t worry about it. However, if you find cracks or chips, you should replace them.

Method 2: Listen To Your Stylus

Another way to check if your stylus needs replacing is to listen to the sound coming from it. Turn your stereo volume up high enough so that you can hear the stylus clearly. If you hear any crackling sounds, then you probably need to replace your stylus.

Cleaning Your Stylus Properly:

Now that you’ve checked to see if your stylus needs repairing, it’s time to clean it properly. Here’s how:

Step 1: Remove the Stylus From Its Case

The first step in cleaning your stylus is to remove it from its case. Open the case carefully. Don’t pull on the stylus until you’re ready to start cleaning it.

Step 2: Clean the Stylus Tip

The next thing you’ll do is clean the tip of your stylus. Start with a soft cloth. Gently wipe the tip of the stylus to remove any dirt or debris.

Step 3: Clean the Rubber Body

In order to clean the body of your stylus properly, you should gently scrub it with a toothbrush or a Q-tip. Do not scratch the stylus surface as you scrub.

Step 4: Dry the Stylus

After cleaning the body of your stylus, dry it completely. You can use a blow dryer or a hairdryer to speed up this process.


Your turntable stylus is an important part of your turntable system. Without it, you won’t be able to play music. Unfortunately, these devices aren’t cheap. That means you should make sure you know how to take care of them. I hope you found this guide helpful in learning more about the care you should give to your turntables.